EIFS Inspection

EIFS Inspection

Tramex has been supplying moisture meters for use on walls and Exterior Insulation Finishing Systems for over 30 years. We supply individual meters, both non-destructive and with probe attachments, as well a complete kit.
The location of excess moisture and decay behind an Exterior Insulation and Finishing System (EIFS) can be difficult and near impossible without the correct equipment, as evidence of this moisture and decay may not be visible on either side of the wall. Excess moisture can be hidden and trapped in the substrate and within the thickness of the wall. If these conditions are allowed to continue the moisture will increase as will the rot and decay eventually leading to possible failure of the cladding system and the structure. Also wet insulation loses its thermal value resulting in unnecessary heat loss or gain and thermal movement in the structure. So in the interest of all concerned, early detection of these problems, or potential problems and corrective remedial action makes good economic sense.

Show:
Sort By:
Wet Wall Detector
The Tramex Wet Wall Detector has been updated and incorporated along with the Tramex Leak Seeker ..
$0.00
RWS - Roof And Wall Scanner
The Tramex RWS Roof and Wall Scanner is a multi-mode non-invasive impedance scanner designed..
$1,600.00
EIFS Inspection Kit
A complete kit featuring the Tramex RWS Roof and Wall Scanner (a combination of the Wet Wall Dete..
$2,495.00