Concrete Inspection Master Kit

Price: $1,960.00
Product Code:  CMK5.1
Availability:  In Stock
(0 reviews)   |   Write a review
Concrete Inspection Master Kit Concrete Inspection Master Kit Concrete Inspection Master Kit Concrete Inspection Master Kit Concrete Inspection Master Kit Concrete Inspection Master Kit
A complete kit for testing per ASTM F2659 & ASTM F2170, featuring the Tramex CMEX II moisture meter and Tramex Hygro-i2 ® relative humidity probes. The Concrete Inspection Master Kit comes in a protective heavy-duty carrying case with die-cut foam lining.
  • Instant, non-destructive concrete moisture content test from 0 - 6.9% with CMEX II to ASTM F2659.
  • Fastest, most reliable Hygro-i2 ® RH probe for testing to ASTM F2170.
  • Perform multiple tests simultaneously.
  • Re-usable Hygro-i2 ® Relative Humidity probes prove to be the lowest cost per ASTM F2170.
  • Test ambient site conditions of Temperature, RH, Dew Point & Mixing Ratio.
  • Backlit display for ease of reading in low level lighting.
  • Check calibration of RH probes as often as required by standards.
  • Instant surface temperature readings to avoid condensation.



All Tramex products are built with highest quality components, calibrated by hand, to exeed best industry standard and to give the user many years of service.

We supply a full one year guarantee against defects in parts & workmanship.

::: Flooring Inspection, Concrete Coatings, Water Damage Restoration.
::: Concrete Slabs & Screeds, Anhydrite/Gypsum Screeds & Boards. Air Humidity (with attachable Hygro-i ® RH probe).
Technical Data
Weight: 8.1lbs (3.65kg)
Size 16.9" x 13.6" x 5.1" (430mm x 345mm x 130mm)
Power 9 Volt PP3 Battery x 2 (included)
Depth of penetration NDT CMEX II approx. 3⁄4" (20 mm)
Measuring Range
Moisture content of concrete 0 to 6.9 % (moisture by weight)
Gypsum Scale 0 to 10 (comparative)
Reference Scale 0 to 100 (comparative)
Relative Humidity 0 to 99%
  • CMEX II Digital, concrete moisture meter.
  • 12 Hygro-i2 ® RH probes for testing to ASTM F2170. 
  • Hygro-i2 ® Electronic Interface Cable 
  • 25 Hole liners for testing to ASTM F2170.
  • 3 Calibration check salts for RH probes.
  • IRTX Infrared surface thermometer.
  • Heavy-duty carry case.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: